P400 Installation

Inverter Interfaces
Thefollowingfigureshowstheinverterconnectorsandcomponents,locatedatthebottomof
theinverter.TheON/OFFswitchandtheLCDlightbuttonmayvarydependingontheinverter
model:
Figure 10: Inverter Interfaces
l LCD panel:displaysinverterinformationandconfigurationparameters
l LCD LEDs:ThreeLEDsindicatethefollowinginverterstatuses:
Color Description Functionality
Green Power production
On - The inverter is producing power. Blinking - Standby
mode. The inverter is in Standby mode until its working
voltage is reached. The inverter then enters Production mode
and produces power.
Off - The inverter is not producing power. This may be during
Night mode, when the inverter ON/OFF switch is OFF or
when an error occurs.
Yellow
Module communication
and inverter shutdown
Blinking:
o
Monitoring information is being received from a power
optimizer.
o
The inverter is being shut down.
Red Fault
On - There is an error. Refer to Errors and Troubleshooting
on page 83 for more information.
Blinking - The inverter is being shut down.
AllLEDsturnonwhiletheinverterisbeingconfigured.
Chapter 3: Installing the Inverter
SolarEdge-Installation Guide MAN-01-00002-4.0
25