P400 Installation
Table Of Contents
- SolarEdge Installation Guide - North America Version 4.0
- Disclaimers
- Support and Contact Information
- Contents
- HANDLING AND SAFETY INSTRUCTIONS
- IMPORTANT SAFETY INSTRUCTIONS
- Chapter 1: Introducing the SolarEdge Power Harvesting System
- Chapter 2: Installing the Power Optimizers
- Chapter 3: Installing the Inverter
- Chapter 4: Connecting the AC and the Strings to the Safety Switch
- Chapter 5: Commissioning the Installation
- Chapter 6: User Interface
- Chapter 7: Setting Up Communication
- Appendix A: Errors and Troubleshooting
- Appendix B: Technical Specifications
- Appendix C: Mechanical Specifications
- Appendix D: External Fan Maintenance and Replacement
- Appendix E: Replacing and Adding System Components
- Appendix F: Inverter Arc Detection and Interruption
SE9KUS SE10KUS SE20KUS Units
STANDARD COMPLIANCE
Safety UL1741, UL1699B, UL1998, CSA 22.2, NEC2014 (sec. 690.12)
Grid connection standards IEEE1547
Emissions FCC part15 class B
RoHS Yes
INSTALLATION SPECIFICATIONS
AC output conduit size / AWG range 3/4” minimum / 12-6 AWG
DC input conduit size / # of inputs/ AWG range
3/4” minimum / 2 pairs/
12-6 AWG
3/4” minimum / 2 pairs /
12-6 AWG
3/4” minimum / 2 pairs /
12-6 AWG
21 x 12.5 x 10.5 / 540 x 315 x 260 in/mm
30.5 x 12.5 x 10.5 / 775 x 315 x 260 in/mm
73.2 / 33.2 73.2 / 33.2 73.2 / 33.2 lb/kg
79.7 / 36.2 79.7 / 36.2 79.7 / 36.2 lb/kg
Fans (user replaceable)
< 50 < 50 < 50 dBA
-13 to +140 / -25 to +60 (CAN version
2
-40 to +60) ºF/ºC
1
SolarEdge’s 9kW and 20kW inverters operate at full power and full currents up to a temperature of 117°F/47°C. The inverters may be used above this temperature with reduced ratings.
2
CAN P/Ns are eligible for the Ontario FIT and microFIT.
Three Phase Inverters
SolarEdge-Installation Guide MAN-01-00002-4.0
106
NEMA3R
Dimensions (HxWxD)
Dimensions with Safety Switch (HxWxD)
Weight
Weight with Safety Switch
Cooling
Noise (typical)
Operating temperature range
1
Protection rating