Installation Guide

Troubleshooting
You can check for connectivity errors by observing the LED
indications in troubleshooting mode.
This functionality is unavailable during pairing or if pairing
failed.
To activate the error display:
Short-press the push-button (< 1 sec). The LED color changes
in the following sequence:
Color1 blinks è 0.25 sec pause è Color1 blinks è 1/2 sec
pause è Color2 blinks è 0.25 sec pause è Color2 blinks.
The following table summarizes the colors and their
indications, and how to troubleshoot errors.

Wi-Fi Gateway and Repeater Installation Guide MAN-01-00559-1.1
Chapter 4: Status, Errors and Troubleshooting 27