Install Manual
Table Of Contents
- Disclaimers
- Revision History
- HANDLING AND SAFETY INSTRUCTIONS
- Chapter 1: Overview
- Chapter 2: Installing and Connecting the Backup Interface
- Chapter 3: System Configuration
- Troubleshooting
- Appendix A: Manually Switching the System to the Grid-connected Mode
- Appendix B: Connecting External CTs
- Appendix C: System Performance LED Indication
- Appendix D: StorEdge Backup Interface Technical Specifications
- Support Contact Information
Upgradability
Up to 3 X 40A CB
(1)
GENERATOR
Maximum rated AC power 15,000 W
Maximum continuous input current 63 Adc
Dry contact switch voltage rating 250/30 Vac/Vdc
Dry contact switch current rating 5 A
2-wire Start Switch Yes
ADDITIONAL FEATURES
Number of communication inputs 2
Communication RS485
Energy Meter (for Import/Export) 1% accuracy
Manual control over microgrid
interconnection device
Yes
STANDARD COMPLIANCE
Safety
UL1741, CSA 22.2 NO. 107,
UL869A
Emission FCC part15 class B
INSTALLATION SPECIFICATIONS
Supported inverters StorEdge Inverter
AC from grid conduit size / AWG range 2'' conduits / #0 - 4/0
AC inverter conduit size / AWG range 1'' conduit / 14 - 4 AWG
AC generator input conduit size / AWG range 1'' conduit / 8 - 3 AWG
Communication conduit size / AWG range 3/4'' / 24 - 10 AWG
Weight 73 / 33 lb / Kg
Cooling Fan (user replaceable)
Noise < 50 dBA
Operating temperature range -40 to +122 / -40 to +50 ˚F / ˚C
Protection rating NEMA 3R, IP44
Dimensions (HxWxD)
20.59 x 13.88 x 8.62 / 523.5 x
352.5 x 219
in / mm
(1)
Each 40A CB supports an 7600W inverter; CB upgrade kit is available with the following part numbers: for
40A CB CB-UPG-40-01
Backup Interface Installation Guide MAN-01-00729-1.0
28 Appendix D: StorEdge Backup Interface Technical Specifications