Datasheet

ManualsBrandsSolarEdge ManualsSolar & Wind PowerEnergy Bank Battery, 10 Kwh

SolarEdge Energy Bank

10kWh Battery

For North America

BAT-10K1P

(2)

BATTERY SPECIFICATION

Usable Energy (100% depth of discharge)

Continuous Output Power 5000 W

Peak Output Power (for 10 seconds)

7500

Peak Roundtrip Efficiency >94.5 %

Warranty

(3)

10 Years

Voltage Range 350-450 Vdc

Communication Interfaces

Wireless*

Batteries per Inverter Up to 3

(4)

STANDARD COMPLIANCE

Safety

UL1642, UL1973, UL9540, UN38.3

Emissions FCC Part 15 Class B

MECHANICAL SPECIFICATIONS

Dimensions (W x H x D) 31.1 x 46.4 x 9.84 / 790 x 1179 x 250 in / mm

Weight 267 / 121 lb / kg

Mounting

(5)

Floor or wall mount

(6)

Operating Temperature

(7)

+14 to +122 / -10 to +50 °F / °C

Storage Temperature (more than 3 months) +14 to +86 / -10 to +30 °F / °C

Storage Temperature (less than 3 months) -22 to + 140 / -30 to +60 °F / °C

Altitude

6562 / 2000

ft / m

Enclosure Protection IP55 / NEMA 3R - indoor and outdoor (water and dust protection)

Cooling Natural convection

Noise (at 1m distance) <25 dBA

(1) Please refer to the SolarEdge Energy Bank battery connections and configuration application note for compatible inverters.

(2) These specifications apply to part number BAT-10K1PS0B-01.

(3) For warranty details please refer to the SolarEdge Energy Bank battery Limited Warranty.

(4) Installations with multiple SolarEdge Energy Bank batteries connected to a single inverter require a pair of branch connectors (DC + and DC -) per battery excluding the

last battery. Support for 3 batteries is pending supporting inverter firmware. The branch connectors should be purchased separately.

(5) Installation and mounting requires handles that should be purchased separately. Please refer to the Accessories' PN table below.

(6) The floor stand is purchased separately. One floor stand is required per SolarEdge Energy Bank battery. Please refer to the Accessories' PN table below.

(7) Please note that operating the SolarEdge Energy Bank at extreme temperatures for extended durations of time may void the Energy Bank’s warranty coverage.

Please see the Energy Bank Limited Product Warranty for additional details.

SolarEdge Energy Bank Battery – Accessories (purchased separately)

Accessory PN

Floor stand

IAC-RBAT-FLRSTD-01

Branch connectors set (includes a pair of DC + and DC - connectors)

Required for installations with multiple SolarEdge Energy Bank batteries with a single inverter

IAC-RBAT-USYCBL-01

Handles

IAC-RBAT-HANDLE-01

All other trademarks mentioned herein are trademarks of their respective owners. Date: 11/2021 DS-000026-3.6-NA. Subject to change without notice.

* The SolarEdge Energy Bank is designed for use with SolarEdge Energy Net for wireless communication. The inverter might require a matching SolarEdge Energy Net Plug-in (more details below).

Using RS485 could reduce the usable energy to 9500Wh.

SolarEdge Energy Net Plug-in

ENET-HBNP-01

Battery inverter extension cable 2m long (MC4 to terminal block)

IAC-RBAT-10M420-01