Manual

TOP BOTTOM

Step 13 - Final Assembly:

Take your decorated shell, and get ready to install it to the baseplate. Le’ts finally use

those three long screws and the nylon spacers that look like a stubby piece of macaroni.

Start by flattening down the battery pack pins, and tuck all the wires in towards the

middle of the robot so they stay out of the way.

Install a 3/4” screw through the top shell, and through a nylon spacer. Screw the top

plate & spacer to the bottom shell, and repeat it for the other two mounting holes.

Step 13a - Flatten down

the battery pack pins

Step 13b - Put a screw in through the

top, and a spacer underneath

Step 13c - Screw it in to the

baseplate.

Note how the antenna

stays behind the screw

& spacer

Install shell

mounting

screws here