Manual
TOP BOTTOM
11
Step 7 - The Power Switch:
The switch is too big and gets in the way if we mount it directly to the baseplate, so we
have to put it on a spacer plate so it takes less space.
Slip the switch wires through the spacer, and drop the whole works into the rectangular
hole from the BOTTOM of the baseplate. Screw it all together with the two #4-40 x 1/4”
long screws, installed form the top side.
7b: Mount the switch into the spacer
7d: Finished installation,
from bottomside
7c: Screw the switch in from
the topside