began Solar Motion Sensor Dual LED Lights KASLRMT2LTA Quick Start Guide Table of Contents Safety & Warnings. Overview... Installation Operation.. Cleaning & Car Safety & Warnings + Read all instructions before using the appliance and retain for reference.
Product Diagram Part List Part |Description Part |Description 1 Light 8 ON/QFF/AUTO Switch 2 Solar Panel 9 Battery Housing Outlet 3 Expansion Screw 10 Solar Panel Mounting Bracket 4 COB LED n L Adjusting Knob 5 Battery Housing 13 TIME Adjusting Knob 6 Motion Detector Head 15 Quick-Clip Mounting Bracket Battery The battery is charged by the solar panel. The solar panel should face the sun and be kept clean in order to charge the battery efficiently.
Installation 1. Determine where the light (1) and solar panel (2) will be installed, up to 5m apart. The solar panel should be in a position to receive full, direct sunlight a minimum of 8 hours a day, such as a wall or roof. 2. Mount the light 2-3 above ground on a solid, secure surface capable of supporting its weight and which will not move when exposed to vibration or wind. It must be high enough to allow for motion detection and light distribution. 3.
Cleaning & Care + When storing indoor for more than 2 or 3 days, turn the switch to “OFF". Store in a dry location free of dust and debris. Ensure the light is out of reach of children. * The light must be fully charged for 5 days and switched to “OFF" position before storage. Storing the light for prolonged periods may damage the light or decrease performance. « Keep the solar panel free from dirt and debris. A dirty solar panel will reduce charging efficiency. Clean regularly with a damp cloth.
