Manual

20 SOLAR-BREEZE NX2
UNIT DOES NOT BACK UP FAR ENOUGH WHEN
IN REVERSE NAVIGATION MODE
Occasionally you may observe that the unit does not back up
far enough to get away from an obstruction when it goes into a
reverse navigation mode. Possible causes and solutions for this
behavior are outlined below:
1. The unit has become water-logged with water getting
trapped in areas where it cannot escape. (See page 14,
Maintaining Buoyancy)
2. There are too many fragments of chlorine tablets in the
chlorine tray, causing the unit to have too much weight
and or blocking water flow through the chlorine tray
while the unit is in reverse navigation mode. To solve
this problem, remove at least one tablet from the tray,
preferably leaving one on the left “port” side only.
REPAIR & SERVICE VIDEO’S
At our Solar-Breeze website there are several repair
and service video’s available for your information.
Enter the following url into your browser of choice:
https://goo.gl/AWzr2q
FAQ, TROUBLE SHOOTING, AND ADDITIONAL USEFUL
WRITTEN INFORMATION
Enter the following url into your browser of choice:
https://goo.gl/j929mL