Manual

OWNER’S MANUAL 17
Store the unit sitting on a flat surface, or in its original storage
box. To prevent damaging the plastic housing, solar-panels or
front bumper-wheels, do not place heavy objects on top of it
while in storage.
ADJUSTING THE POOL WATER LEVEL
The Solar-Breeze NX2 works best when the front bumper-
wheels can run freely along the side of the pool. When pools
have a lip or overhang, the front bumper-wheels or the top
edge of the Solar-Breeze NX2 may get stuck under the lip
or overhang. This may result in frequent reverse navigations
or, in some cases, cause the unit to get stuck and not be able
to move, even when it goes into reverse. This problem can
normally be addressed by either raising the water level of the
pool by 1” so the front bumper-wheels run along the lip of the
pool, or by lowering the water level 1” so the front bumper-
wheels and top edge of the Solar-Breeze NX2 are completely
clear of the lip. It is best to have the front bumper-wheels
riding above the pool skimmer inlet.