Manual

OWNER’S MANUAL 15
• Debris is pushed in front of the unit rather than being pulled
into the collection chamber.
• Unit does not reverse properly when it goes into the reverse
navigation mode.
When these symptoms occur, simply remove the Solar-Breeze NX2 from
the pool and set it in a vertical position on its end (label towards the
ground) facing the sun for a half day. This will allow it to dry, and will
also allow the Solar-Breeze NX2 to gain a full charge. Never rest the
unit on the front bumper-wheels, as they may deform, and rub against the
housing. The unit should resume normal operation when it is placed back
in the pool.
CLEANING THE SOLAR-BREEZE NX2
After a period of weeks or months, the Solar-Breeze NX2 may begin to
accumulate calcium or mineral deposits along the water line and also
around the edges of the solar panels. Before these deposits become
severe and either cause damage to the unit or impact its performance,
we recommend that you clean the Solar-Breeze NX2 using the following
procedure:
• Use a sponge or damp cloth to wipe down the
Solar-Breeze NX2 with a dilute mixture of CLR and
water to break down the mineral deposits.
• Thoroughly wash the Solar-Breeze NX2 using a
mixture of warm water and soap.
• Dry the Solar-Breeze NX2 using a soft dry cloth.
• If desired, use a standard household glass cleaner
to clean and shine the solar panels. (As solar panels
age, self-cleaning car wax can restore their luster
and remove micro scratches.)
The procedure for cleaning debris from the collection chamber was
covered on pages 13 and 14 of this guide.