Manual

14 SOLAR-BREEZE NX2
front and rear handles but keeping the front of the unit slightly higher than
the rear. Remove the debris tray by sliding it out the front of the unit, and
empty the tray and collection chamber into a trash receptacle or compost
bin. Keep the tray horizontal so that the debris will not fall off the tray.
We recommend that you rinse the debris tray after emptying to remove
any fine debris. You may also choose to wash out the inside of the debris
collection chamber using a low-pressure stream from a garden hose.
DO NOT USE A HIGH PRESSURE STREAM OF WATER TO CLEAN THE
BODY OF THE SOLAR-BREEZE NX2.
Slide the clean debris tray back into the Solar-Breeze NX2 and listen for
the click that indicates it is locked in place. Place the unit back in the pool
and turn the switch to the ON position.
ADDING CHLORINE OR SANITIZER
TABLETS TO THE CHLORINE DISPENSER
TRAY
To add chlorine tablets to the chemical dispenser, remove the robot from
the water, slide the chlorine dispenser tray out of the side of the Solar-
Breeze NX2. Add one or two jumbo 3” chlorine tablets to the tray. Our
tray is designed to hold a maximum of two (2) jumbo 3” chlorine tablets
in the chlorine dispenser at one time. Using more than two (2) chlorine
tablets may result in sluggish performance. Slide the dispenser tray back
into the Solar-Breeze NX2. Place the unit back in the pool and turn the
power switch to the ON position. With chlorine tablets in the dispenser
tray, the Solar-Breeze NX2 can now clean AND sanitize your pool at the
same time.
MAINTAINING BUOYANCY
After several days or weeks of operation, water may accumulate in some
areas of the apparatus where it cannot escape. This may make the unit
behave sluggishly. Symptoms of such water-logging may include:
• Unit moves more slowly through the water.