Parts catalog

Page 8
Parts Catalog
2016 v1.85
Rail Assembly
support | ironridge.com | [phone]
End Clamps
End clamps are used when top-mounting modules to the top slot of XR Rails. These clamps are not dependent upon
the module’s mounting holes. IronRidge End Clamps require 1.5” of rail on each end and vary in height depending on
the module being mounted. Please use the sizing chart on the next page to determine the right part for your project.
Also available in black anodized nish. Black is special order, call for additional details.
Item Number Description Item Number Description
29-7000-125 Kit, 4pcs, End Clamp I, 1.25” Mill 29-7000-125B Kit, 4pcs, End Clamp I, 1.25” Black
29-7000-130 Kit, 4pcs, End Clamp L, 1.30” Mill 29-7000-130B Kit, 4pcs, End Clamp L, 1.30” Black
29-7000-134 Kit, 4pcs, End Clamp A, 1.34” Mill 29-7000-134B Kit, 4pcs, End Clamp A, 1.34” Black
29-7000-224 Kit, 4pcs, End Clamp B, 1.41” Mill 29-7000-224B Kit, 4pcs, End Clamp B, 1.41” Black
29-7000-150 Kit, 4pcs, End Clamp M, 1.50” Mill 29-7000-150B Kit, 4pcs, End Clamp M, 1.50” Black
29-7000-157 Kit, 4pcs, End Clamp C, 1.57” Mill 29-7000-157B Kit, 4pcs, End Clamp C, 1.57” Black
29-7000-165 Kit, 4pcs, End Clamp J, 1.65” Mill 29-7000-165B Kit, 4pcs, End Clamp J, 1.65” Black
29-7000-171 Kit, 4pcs, End Clamp E, 1.71” Mill 29-7000-171B Kit, 4pcs, End Clamp E, 1.71” Black
29-7000-214 Kit, 4pcs, End Clamp F, 1.81” Mill 29-7000-214B Kit, 4pcs, End Clamp F, 1.81” Black
29-7000-187 Kit, 4pcs, End Clamp K, 1.87” Mill 29-7000-187B Kit, 4pcs, End Clamp K, 1.87” Black
29-7000-204 Kit, 4pcs, End Clamp G, 1.97” Mill 29-7000-204B Kit, 4pcs, End Clamp G, 1.97” Black
29-7000-230 Kit, 4pcs, End Clamp H, 2.30” Mill 29-7000-230B Kit, 4pcs, End Clamp H, 2.30” Black