Specifications
UL 1703; VDE Quality Tested; CE-compliant;
IEC 61215 (Ed.2); IEC 61730 (Ed.1) application class A
Specications subject to technical changes © Hanwha Q CELLS Q.PEAK BLK-G4.1_290-300_2016-09_Rev03_NA
At least 98 % of nominal power during rst year.
Thereafter max. 0.6 % degradation per year.
At least 92.6 % of nominal power up to 10years.
At least 83.6 % of nominal power up to 25years.
All data within measurement tolerances.
Full warranties in accordance with the warranty
terms of the Q CELLS sales organisation of your
respective country.
Typical module performance under low irradiance conditions in
comparison to STC conditions (25 °C, 1000 W/m
2
).
Hanwha Q CELLS America Inc.
300 Spectrum Center Drive, Suite 1250, Irvine, CA 92618, USA |
TEL +1 949 748 59 96 | EMAIL inquiry@us.q-cells.com | WEB www.q-cells.us
MECHANICAL SPECIFICATION
Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE
IRRADIANCE [W/m²]
RELATIVE EFFICIENCY [%]
200 400 600 800 1000
110
100
90
80
Irradiance [W/m²]
Format 65.7 in × 39.4 in × 1.26 in (including frame)
(1670 mm × 1000 mm × 32 mm)
Weight 41.45 lbs (18.8 kg)
Front Cover 0.13 in (3.2 mm) thermally pre-stressed glass with anti-reflection technology
Back Cover Composite film
Frame Black anodized aluminum
Cell 6 × 10 monocrystalline Q.ANTUM solar cells
Junction box 2.60-3.03 in × 4.37-3.54 in × 0.59-0.75 in (66-77 mm × 111-90 mm ×
15-19 mm), Protection class IP67, with bypass diodes
Cable 4 mm² Solar cable; (+) ≥ 39.37 in (1000 mm), (-) ≥ 39.37 in (1000 mm)
Connector Multi-Contact MC4 or MC4 intermateable, IP68
PROPERTIES FOR SYSTEM DESIGN
Maximum System Voltage V
SYS
[V]
1000 (IEC) / 1000 (UL)
Safety Class II
Maximum Series Fuse Rating [A DC] 20 Fire Rating
C
(IEC) / TYPE 1 (UL)
Design load, push (UL)
2
[lbs/ft
2
] 75 (3600 Pa) Permitted module temperature
on continuous duty
− 40 °F up to +185 °F
(− 40 °C up to +85 °C)
Design load, pull (UL)
2
[lbs/ft
2
] 55.6 (2666 Pa)
2
see installation manual
QUALIFICATIONS AND CERTIFICATES
PACKAGING INFORMATION
Number of Modules per Pallet 32
Number of Pallets per 53' Container 30
Number of Pallets per 40' Container 26
Pallet Dimensions ( L × W × H ) 68.7 in × 45.3 in × 46.1 in
(1745 mm × 1150 mm × 1170 mm)
Pallet Weight 1435 lbs (651 kg)
NOTE: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use
of this product.
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
100
95
90
85
80
75
155 25200 10
YEARS
98
Q CELLS
Industry standard for tiered warranties
*
Industry standard for linear warranties
*
*
Standard terms of guarantee for the 10 PV companies
with the highest production capacity in 2014 (as at: September 2014)
DETAIL A
0.630" (16 mm)
0.335" (8.5 mm)
0.965" (24.5 mm)
Junction bo×
Product label
38.58" (980 mm)
65.7" (1670 mm)
4 × Fastening points (DETAIL A)
Cable with
connectors
Frame
5.90" (150
mm)
39.4" (1000 mm)
37.44" (951 mm)
1.26" (32 mm)
8 × Drainage holes
6 × Grounding points ø 0.177" (4.5 mm)
39.37" (
1000 mm)
13.6“
(345 mm)
ELECTRICAL CHARACTERISTICS
POWER CLASS 290 295 300
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC
1
(POWER TOLERANCE +5 W / -0 W)
Minimum
Power at MPP
2
P
MPP
[W] 290 295 300
Short Circuit Current* I
SC
[A] 9.63 9.70 9.77
Open Circuit Voltage* V
OC
[V] 39.19 39.48 39.76
Current at MPP* I
MPP
[A] 9.07 9.17 9.26
Voltage at MPP* V
MPP
[V] 31.96 32.19 32.41
Efficiency
2
η
[%] ≥ 17.4 ≥ 17.7 ≥ 18.0
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NOC
3
Minimum
Power at MPP
2
P
MPP
[W] 214.4 218.1 221.8
Short Circuit Current* I
SC
[A] 7.77 7.82 7.88
Open Circuit Voltage* V
OC
[V] 36.65 36.92 37.19
Current at MPP* I
MPP
[A] 7.12 7.20 7.27
Voltage at MPP* V
MPP
[V] 30.12 30.30 30.49
1
1000 W/m², 25 °C, spectrum AM 1.5 G
2
Measurement tolerances STC ± 3 %; NOC ± 5 %
3
800 W/m², NOCT, spectrum AM 1.5 G * typical values, actual values may differ
Certified
UL 1703
(254141)
TEMPERATURE COEFFICIENTS
Temperature Coefficient of I
SC
α
[% / K] + 0.04
Temperature Coefficient of V
OC
β
[% / K] − 0.28
Temperature Coefficient of P
MPP
γ
[% / K] − 0.39
Normal Operating Cell Temperature NOCT [°F] 113 ± 5.4 (45 ± 3 °C)