Specifications

The World Depends on Sensors and Controls
OFFICES
2211 West Casino Road
Everett, Washington 98204 USA
425-353-8833
4467 White Bear Pkwy
St. Paul, MN 55110 USA
800-553-6418
www.SensataPower.com
ME-BMK SPECIFICATIONS
DC volts 7 to 70 (±0.5%) auto voltage detection
DC amps ±0.1 to 999 (±1.0%)
Battery SOC % 0 to 100% (1% increments)
Power draw < .6 watts
Amp hours in/out ±32,768 amp hours (1 AH increments)
rAH out (resettable amp hours removed) 0 to 65,535 amp hours, resettable (0.1 AH increments)
tAH out (total amp hours removed) 0 to 65,535,000 amp hours (0.1 k or 100 AH increments)
Minimum/maximim DC 7 to 70 VDC, resettable
Shipping weight 2 lb (.9 kg)
Kit includes Manual, sense module, DC shunt, twisted pair wire, and communication cable
Sense wire Twisted pair –blue & orange, 5’ length, 18 AWG wire
Communication cable 4-conductor, 10’ twisted pair, telephone standard
Remote requirements Use with an ME-RC with firmware revision of 2.0 or higher or an ME-ARC (all revisions)
DC SHUNT (NOT INCLUDED WITH THE ME-BMK-NS KIT)
Resistance 0.1 milliohm (500A at 50mV)
Continuous current 410 amperes maximum
Overload current Overloads to 500 amps for less than 5 minutes if normally operated at less than 300 amps
Testing for specifications at 25° C. Specifications subject
to change without notice.
February 2017 Rev D Part #64-0480
ME-BMK BASIC CONFIGURATION DIAGRAM