Specifications

Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK)* from
Sensata Technologies. Acting as a “fuel gauge” for your batteries, the ME-BMK monitors
their state of charge (SOC) and then provides this information in an easy-to-understand
display via the ME-ARC or ME-RC remotes. With accurate SOC readings, you can avoid
unnecessary battery recharging, saving on fuel and long-term maintenance costs.
If you already have a Magnum brand Inverter/Charger and Magnum brand Remote*, the
ME-BMK is an easy retrofit. Simply install the kit according to the installation manual
and begin monitoring your battery bank via the “Meter” button on your ME-RC.
Model Numbers
 ME-BMK
 ME-BMK-NS (no shunt)
Available For
 Renewable Energy Systems
Off-grid Power
Back-up Power
 Marine Systems
 RV Systems
Works With
 ME Series
 MM-AE Series
 MS Series
 MS-PAE Series
 RD Series
Available Readings from
the ME-BMK / ME-BMK-NS
 State of Charge (SOC) 0 - 100%
 DC volts
 DC amps
 Amp hours in/out
 Resettable amp hours out
 Total amp hours out
 Minimum volts DC
 Maximum volts DC
 Temperature compensated
 Auto detects input voltage
Kit Includes
 Sense module
 DC shunt 50mv/500 amp shunt
(not included in the ME-BNK-NS
kit)
 Twisted pair wire 5’ length,
18 AWG wire
 Communication cable 10’ length,
4-conductor, telephone standard
BATTERY MONITOR KIT (ME-BMK)
* Requires remote revision 2.0 or higher.