SDS
_____________________________________________________________________________________________
1474140 - SolaMist Pro Concentrate 2 Revision Date 10-Sep-2018
Explosion Data
Sensitivity to Mechanical Impact
None.
Sensitivity to Static Discharge
Yes.
Special protective equipment for
fire-fighters
Firefighters should wear self-contained breathing apparatus and full firefighting turnout
gear. Use personal protection equipment.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Evacuate personnel to safe areas. Use personal protective equipment as required. See
section 8 for more information. Avoid contact with skin, eyes or clothing. Ensure adequate
ventilation. Keep people away from and upwind of spill/leak. ELIMINATE all ignition sources
(no smoking, flares, sparks or flames in immediate area). Pay attention to flashback. Take
precautionary measures against static discharges. All equipment used when handling the
product must be grounded. Do not touch or walk through spilled material.
Other Information
Ventilate the area. Refer to protective measures listed in Sections 7 and 8.
Methods and material for containment and cleaning up
Methods for containment
Stop leak if you can do it without risk. Do not touch or walk through spilled material. A vapor
suppressing foam may be used to reduce vapors. Dike far ahead of spill to collect runoff
water. Keep out of drains, sewers, ditches and waterways. Absorb with earth, sand or other
non-combustible material and transfer to containers for later disposal.
Methods for cleaning up
Take precautionary measures against static discharges. Dam up. Soak up with inert
absorbent material. Pick up and transfer to properly labeled containers.
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Use personal protection equipment. Avoid breathing vapors or mists. Keep away from heat,
hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding
and bonding connection when transferring this material to prevent static discharge, fire or
explosion. Use with local exhaust ventilation. Use spark-proof tools and explosion-proof
equipment. Keep in an area equipped with sprinklers. Use according to package label
instructions. Handle in accordance with good industrial hygiene and safety practice. Avoid
contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from
heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static
electricity). Keep in properly labeled containers. Do not store near combustible materials.
Keep in an area equipped with sprinklers. Store in accordance with the particular national
regulations. Store in accordance with local regulations.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
_____________________________________________________________________________________________
Page 4 / 10
Control parameters