User Guide

9
Element’s Keypad
Remote Controller
If the element is disconnected from the power supply the controller will loose the program data. When
power is restored, the controller will switch to the last used water temperature.
The program data must be re-sent to the element from the remote control. The remote will store the
programme data.
On / Standby” button
(With acoustic signal)
Adjust target temperature
Fixed program functions
(Press button several times)
2H
2 hour boost function
4H
4 hour boost function
PC
APP mode to control with the APP
RC
Control from remote control
Remote Controller
IR remote control
(Supplied Separately)