User Guide

6
Setting the element to WiFi pairing
mode
Resetting the Device
1) Turn the Device
on
2) Go to app mode “PC”
Press for 5 seconds until the beep
sounds
Flashes fast / slow
The device is ready to pair
When this symbol is flashing
fast. If not flashing fast, reset
the device.
Auto Pairing
Pairing the element to the App
2) Press Add Device
1 Open the App 3) The App will search for the device
4) Press Add
↑ ↑
5) Now press the plus Icon.
Then”Done”
Towel Rail
Before pairing, make sure the element has been set to pairing mode.