User Guide

12
Setting programme
example
Setting the current
time and day
To programme Monday and Wednesday the same, select both days then enter
the start and stop times. Then if you want a different entry for Friday, go to the data
entry again and only select Friday.
If you want the radiator will be off completely for a day, make sure that no start/
stop times are entered on that day.
• 1 times = Set summer/ Winter time (Change with + or - )
• 2/3 times= Set the current time (Change with + or - )
• 4 times = Set the day of the week (Change with + or - )
Press:
Press: 1x= Mon, 2x=Tue, 3x=Wed,
4x=Thu, 5x=Fri, 6x=Sat, 7x=Sun
If you’d like to set several days the same press the +
button on the days you’d like to select. The cursor will
flash quickly, indicating that day has been selected. Now
press
to move to the next day. The cursor will move to
the next day. If you do not want to select a day press
without pressing +.
Example
As an example, Wednesday is also selected for programming.
Press 1x to select Mon, then +
to confirm. Press twice to
skip Tuesday and move onto
Wednesday.
Press + and the cursor
will flash quickly
Period
Blinks to start
time setting
Confirm selection
Set time with +/-
Press
to move onto the next day.
Press until the every day has
been passed.