R4 Smart Heating Element User Guide 1
Contents • Security: Page 3 • Use in Accordance With Regulations : Page 3 • Safety Instructions: Page 3 • Pre installation: Page 4 • Element Control Panel: Page 4 • Using The Control Panel: Page 5 • WiFi App: Page 5 • Pairing The Element to The App: Page 6,7 • WiFi App Control Panel: Page 8 • Element Key Pad: Page 9 • Remote Control: Page 9 • Using The Remote Control: Page 10 • Setting The Timer with Remote Control: Page 11, 12 • Sending Data From The Remote To The Element: Page
Security Danger Please read this instruction manual carefully and keep all applicable documents for future reference. Danger to life from electric shock Danger Danger to life or personal injury Warnings are classified as follows: Danger Risk of property damage or damage to the environment Use in accordance with Regulations This heating element is a component and must only be used if connected to a liquid-filled radiator (e.g. towel rail or other suitable radiator).
Pre Installation Always observe the national regulations, standards, directives and laws. Children must not play with the product or operate it . The following work may only be carried out by persons who are sufficiently qualified. This is particularly true for the electrical work. • Assembly • Dismantling • Installation • Inspection and Maintenance • Repair • Decommissioning 1. Observe all instructions and information accompanying the product the manufacturer or distributor of the radiator. 2.
Using the control unit After the element has been connected to the power supply, the symbol “--” will flash in the upper area of the display. This indicates that the element is receiving power and ready for use. The element is in the standby position. Pressing the power button will switch the element from stand by to “On”. The last temperature setting used will appear on the display. If the Sun symbol flashes, this means the current temperature is different to the target temperature.
Setting the element to WiFi pairing mode 1) Turn the Device Resetting the Device 2) Go to app mode “PC” Press for 5 seconds until the beep sounds The device is ready to pair Flashes fast / slow on When this symbol is flashing fast. If not flashing fast, reset the device. Pairing the element to the App Auto Pairing Before pairing, make sure the element has been set to pairing mode. 1 Open the App 3) The App will search for the device Towel Rail ↑ ↑ 5) Now press the plus Icon.
)The App will then ↑ and press Next ↑ begin to pair with the R4. 6) Enter WiFi details Wait until the App 8) Once connected, the prompts you to proceed. above image will be displayed. Now name the device and save Manual Pairing If the heater does not appear, as showing step 3, add the heater manually. 1) Press Add device, then select Heater (WiFi). This can be found under “Small home appliances”, if not immediately visible.
App’s Control Panel Back to device list Edit Device Name Target temperature Using the slider, adjust the target temperature.
Element’s Keypad On / Standby” button 2H (With acoustic signal) 2 hour boost function Adjust target temperature 4H 4 hour boost function Fixed program functions (Press button several times) PC APP mode to control with the APP RC Control from remote control If the element is disconnected from the power supply the controller will loose the program data. When power is restored, the controller will switch to the last used water temperature.
Using the remote control Batteries (2 pieces type AAA 1.5V) are not included Do not use the remote control in the bath, shower etc. Keep the remote control far away from water and other liquids. To remove the protective foil The display of the remote control is protected by a foil. This can removed before use. Inserting the batteries Open the cover at the back of the remote control. Then insert the two batteries (2 pieces, type AAA, 1.5 V) into the slot.
Setting the timer using the remote control • • • Select which day(s) of the week are being programmed. It is possible to programme a single or multiple days. Up to 4 different periods per day can be defined. Press the days 1-7 will be displayed. A cursor will flash under the 1st day of the week (Monday). If you’d like to programme several days to be the same, press the + button. The cursor will flash quickly, indicating the above day has been selected. Now press move to 2 (for Tuesday).
Press: Setting the current time and day Setting programme example • 1 times = Set summer/ Winter time (Change with + or - ) • 2/3 times= Set the current time (Change with + or - ) • 4 times = Set the day of the week (Change with + or - ) To programme Monday and Wednesday the same, select both days then enter the start and stop times. Then if you want a different entry for Friday, go to the data entry again and only select Friday.
Sending data from the remote to the element The element can only received data sent from the remote if: • The transmission is performed at a short distance (max. 8 metres) • There are no obstacles between the element and remote • The element is in RC mode. - The remote control must not be password-protected. If the remote control is password-protected, remove the protection and send this change to the controller as well.
Deleting entries during data entry If you make a mistake when entering the day, time, temperature etc., the entry can be cancelled by pressing the button. The display will then return to the last step. Switching between Summer and Winter time Press and hold the button. Each time the button is pressed, the S – W – S information changes. When the required time is displayed, there is no need to press a button to confirm.
Symbols on the display If the remote control has been disabled by a password and you try to make an entry, the display “Lo Ct” will appear and you will not be able to make the entry. Once a password has been successfully entered to disable the system, the word “good” will appear and the remote control will be disabled. This symbol is also shown to confirm successful entry for other entries, e.g.
SolAire Heating Products (+ 44) 01325 717 899 info@solairehp.co.
