Instruction Manual
ES
EN
(Original instructions)
• The red on light (4) will come on. The display
screen (12) will show “ON”.
• Press the programmable button (9). The red on
light (4) will go off and the blue temperature se-
lection light (11) will come on. The number “50”
will ash on the display screen (12).
• Select the desired temperature by pressing the
+ or temperature selection buttons.
• You can select any temperature between 50o
and 95oC, in increments of 5oC.
• Once you’ve selected the temperature, the
number indicated will ash for a few seconds
and then be memorised. The number shown
on the screen indicates the current temperatu-
re of the water.
• The kettle may be turned off manually at any
time using the on/off switch (3). The appliance
will beep after 12 seconds of boiling.
• When the water reaches the selected tem-
pe- rature, it will be kept at this temperature
for 2 hours. The kettle will switch itself on and
off automatically as necessary to maintain the
desired temperature.
• After maintaining the temperature for two
hours, if the kettle has not been used it will go
into standby mode.
CLEANING
• Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
• Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
• Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
• Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive pro-
ducts, for cleaning the appliance.
• Neither parts of this appliance are suitable for
cleaning in the dishwasher.
HOW TO DEAL WITH LIME SCALE INCRUS-
TATIONS:
• For the appliance to work correctly it should be
kept free of limescale or magnesium incrustati-
ons caused by the use of hard water.
• To prevent this kind of problem, we recom-
mend the use of water with low lime or magne-
sium mineralisation.
• However, if it is not possible to use the kind of
water recommended above, you should perio-
dically remove the limescale from the applian-
ce:
• Every 6 weeks if the water is “very hard”.
• Every 12 weeks if the water is “hard”.
• A specic anti-lime scale product should be
used on this kind of product.
• Homemade solutions are not recommended in
the decaling of this appliance, such as the use
of vinegar