Datasheet
MAIN COMPONENTS 11
en
MAIN COMPONENTS
1 Main body
2 On/off foot switch
3 Cord-winder foot button
4 Groove for holding the brush while the appliance is temporarily stopped
5Power cord
6 Outlet filter grille
7 HEPA air outlet filter
8 Button for opening dust container
9 Dust container
10 Inner dust container chamber
11 Release tabs for the flexible hose
12 Flexible hose connection
13 Flexible hose
14 Motor protection filter
15 Motor filter protection holder
16 Carry handle
17 Release button for dust container
18 Dust container cover
19 Manual suction regulator
20 Telescopic metal tube
21 Button for adjusting the telescopic tube height
22 Accessory holder
23 All-purpose brush for floors and carpets
24 Storage hook
25 Retractile brush push button
26 Brush for parquet floors
27 Tip for vacuuming grooves and corners
28 Upholstery brush
USE
NON-STOP CYCLONE SYSTEM CYCLONIC TECHNOLOGY
The vacuumed dust enters the dust container (9) and remains suspended thanks to the
Non-Stop Cyclone System cyclonic technology. Any dust particles that escape from the
outer dust container chamber are retained in the inner chamber (10) before passing
through the motor protection filter (14), thereby ensuring that the air leaving the
appliance is free from dust particles.
) This appliance has been designed exclusively for vacuuming floors, carpets, furniture
and fabrics. Do not use it for any other purpose.
) Never vacuum live ash, splinters, sharp objects, or liquids.
) Never vacuum lit matches or cigarette butts. Do not vacuum toxic material (ammonia,
etc.).
) Completely remove all the elements used for transportation and packaging.
n Unplug the appliance from the mains before adding or removing any accessories or
performing any maintenance tasks.
n Do not use the appliance above the height of the power cord.
1 Check that the dust container (9) and filters (7 and 14) are fitted correctly. See the
following section (Cleaning and Conservation)
2 Insert the flexible hose (13) into the connection (12) until it clicks into place When you
want to remove the hose, press the release tabs (11) at the same time.
AS3258.book Page 11 Thursday, January 14, 2010 2:13 PM