Quick Start Guide

1. Make sure to unplug your HELLO2+ device from power in order to initialize the
re-pairing process.
2. On the HELLO Air Remote press and hold the and buttons. You will notice
the RED LED blinking intermittently. After that, release the buttons.
4. Plug back in your HELLO 2+ device and wait for it to start. A few seconds after, the
red LED on the HELLO Air Remote will blink again indicating that the device is paired
successfully.
5. Test the HELLO Air Remote. Try checking the arrows, volume and other functions.
If the HELLO Air Remote is responding as expected, your setup is complete.
HOW TO PAIR A NEW HELLO AIR REMOTE
Press and Hold
PRIVACY BUTTONS
To guarantee your privacy with no hacking risks, we have designed
two hardware switches into the HELLO 2+ device so you can
physically enable or disable the camera and microphones from
the system.
Mute Video
Mute Audio
Note: To ensure these buttons are un-hackable, their function cannot be controlled
from the HELLO Air Remote or any software.
09
08