www.solaborate.
THANK YOU Dear Customer, Thank you for purchasing HELLO 2+, an All-In-One Communication Device for Video Conferencing, Camera Feed with Voice and Motion Detection, Night Vision, Wireless Screencasting, Screen Sharing, TV Streaming and more.
CAUTION WHAT’S IN THE BOX RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
CONNECT YOUR HELLO 2+ TO THE TV Once you unpack your new HELLO 2+ device from the box, simply follow these steps to get started: 1. Place your HELLO 2+ on top or bottom of the TV. 2. Use the hinge to clamp your device to the TV. 3. Find the power supply port on the back of your device, and plug it in. 4. When you are done, hook in the power supply to the power outlet. 5. Locate the HDMI cable on the back of your device and connect the other end to the TV. 6.
Declaration of EU Compliance HOW TO SET UP YOUR HELLO 2+ DEVICE Bluetooth: 2.402GHz - 2.480GHz Max. output power: 7.58 dBm WiFi 2.4GHz: 2.4 GHz - 2.4835 GHz (2.4 GHz ISM Band) Max. output power: 17.47 dBm WiFi 5GHz: 5.15 - 5.35GHz, 5.47 - 5.725GHz and 5.725 - 5.85GHz Max. output power: 19.34 dBm 1. Turn on the TV Screen you want to connect to, wait for the device to successfully boot and show on the screen. Make sure that the TV source is set at the HDMI port you connected the HELLO HDMI cable into.
HOW TO USE THE HELLO AIR REMOTE With the HELLO Air Remote you can control your HELLO 2+ device. The HELLO Air Remote comes pre-paired to your device. 1. Power Button (hold the button for three seconds to reboot HELLO 2+ device). 2. Accept/Decline Button (use the green button to answer calls and the red button to decline calls). 3. Mute Button (use the button to mute microphones during a call on your HELLO 2+). 4. Arrow Keys (use the buttons to navigate through the menu).
FCC WARNING STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HOW TO PAIR A NEW HELLO AIR REMOTE PRIVACY BUTTONS 1. Make sure to unplug your HELLO2+ device from power in order to initialize the re-pairing process. To guarantee your privacy with no hacking risks, we have designed two hardware switches into the HELLO 2+ device so you can physically enable or disable the camera and microphones from the system. 2. On the HELLO Air Remote press and hold the and buttons. You will notice the RED LED blinking intermittently. After that, release the buttons. 4.
