Product Manual

11
EN
5. Start-up
Prior to initial set-up, check whether the batteries have been installed correctly in the device. Do not
point the laser at people when you switch the device on.
Inserting batteries
1. Open the battery compartment cover with an appropriate screwdriver.
2. Insert batteries making sure that the poles of the batteries are in the right position.
3. Close the battery compartment cover with an appropriate screwdriver.
Only use type 1.5 V AAA batteries!
If the device is not used for a long period of time, remove the batteries.
NOTE
The intensity of the laser lines can vary depending on the battery quality.