Manual

6 rev. 0512 MKTG-IM-TOLAR-TSAL-BACK TO BACK-003
Installation and Owner’s Manual | TSAL B2B Series
2.3 System Specifications
ITEM DESCRIPTION
Solar Panel / ThinFilm Poly-crystalline, Framed, with high-transmission 3mm tempered
glass cover / Flexible, Amorphous silicon with butyl adhesive coating
Solar Panel Mounting Assembly Architectural Angle Aluminum Mounting Legs
Battery NRGLife™ - Sealed, No-maintenance, Gel Cell Lead Acid
Battery Charge Indicator Single green LED indicates charging. Single red LED indicates load
present/low voltage disconnect.
Power Management Solid-state charge controller with low voltage disconnect (LVD)
Hardware Stainless steel, tamper resistant
Illumination Technology Discrete LEDs
Illumination “On” Time System Dependent
Minimum Autonomy 5 days
Operating Temperature -30°C to + 80°C (-22°F to + 176°F )
Weight Varies With Unit Size
TABLE 2 SYSTEM SPECIFICATIONS
DESCRIPTION
Solar Panel Assembly (PV Panel or ThinFilm)
Solar Panel Mount (for PV Panel)
Batteries 3 x 12V 33aH
Solar Panel PV Harness
AdLight Lightbar (2)
AdLight Harness (2)
Battery Harness
Triple Harness
Controller
Mounting Hardware
PV Panel Hardware
AdLIght hardware
Reflector side
Reflector bottom
TABLE 1 PARTS LIST
The Sol TSAL Ad Light System is shipped as a complete kit. Prior to assembly, remove the entire contents
of the kit from the packaging and check the contents of the kit against the Parts List (Table 1). For full
details refer to Shipping Forms.
Please call Sol Customer Service at [phone] if any components or hardware are missing.
2.2 Unpacking and Inspection