Product Manual

11
SOL-M™ Blunt Fill Needle
SOL-M™ Blunt Fill Needle with Filter
Medication
Preparation
Usage Guidelines
Remove the Blunt Fill Needle from its
package
and connect to the syringe.
Remove the needle cap.
BFN - Insert the needle into the center of
the vial stopper at a 90°angle. This will help
reduce the risk of rubber fragments from
the side of the vial stopper contaminating
the medication.
BFNF - Draw up medication from a glass
ampoule. Note: not for drawing up
medications with molecules greater
than 5 microns.
Once medication has been prepared
and is in the syringe, ready for
administration, remove the BFN/BFNF
and dispose it into a sharps container.
The Blunt Fill Needle is for
single use only.
.
Reuse will
dull the needle, remove
the silicone coating
and increase the chance
of coring and rubber
fragmentation.
Sales Unit: 100 pcs/Box; 1000 pcs/Case
90°
15°
CE-marked
Product Specification
Nominal length of needle tube
Tolerance
25 to 39
+1.5 / -2.5
40
0 / -4
> 40
+1.5 / -2.5
Note:
•
Needle tube length tolerances based on ISO 7864 (dimensions in millimeters)
Reference
number
Gauge size
Outer diameter
(mm)
(mm) (inch)
Product description
Length
18G
18G
18G
18G
18G
18G
1.2 mm
1.2 mm
1.2 mm
1.2 mm
1.2 mm
1.2 mm
50 mm
50 mm
40 mm
40 mm
25mm
25 mm
SOL-M™ Blunt Fill Needle 18G*2”
SOL-M™ Blunt Fill Needle w/ Filter 18G*2”
SOL-M™ Blunt Fill Needle 18G*1 1/2”
SOL-M™ Blunt Fill Needle w/ Filter 18G*1 1/2”
SOL-M™ Blunt Fill Needle 18G*1”
SOL-M™ Blunt Fill Needle w/ Filter 18G*1”
2”
2”
1 1/2”
1 1/2”
1”
1”
110023
110023F
110022
110022F
110021
110021F
All products with Medical Paper