Instructions / Assembly

EOS
9
MULTIPLE AWNINGS
The EOS Awning is available up to 120". For widths that are greater than 120" it is
possible to mount two shorter awnings side by side to maximize coverage of the area.
Example for a 150" wide window, order two 75" awnings.
M OUNTING THE A WNING
1. On the back of the awning, remove the shipping block between the battery
and housing. Slide the battery in to mate the connectors. The tab will
“ratchet” and lock as the battery is being moved into place. The awning will
sound three (3) short beeps to indicate the battery is connected.
2. Lift the awning and hook onto the mounting plate. Center the awning.
3. Rotate the awning down onto the bracket. Press the bottom of the awning
until the latches "click".
NOTICE If any extra force is required to engage the latches, the
mounting plate is not flat and will require shimming. The mounting plate
MUST be mounted flat to allow the awning to snap on easily. Failure to do
so will result in improper operation of the awning.
SoL020
Mounting Surface
4 3/8"Mounting Plate 1 Mounting Plate 2
3 1/2" Minimum
Plate = Awning Width - 4 1/4"
Awning Width
Minimum
(Minimum Mounting Surace Length = Mounting Plate 1 + Mounting Plate 2 + 4 3/8")
Plate = Awning Width - 4 1/4"
Awning Width
Hook Awning Onto Plate
and Center
Rotate Awning Down
and Press Until Latches
"Click"
SoL004
Latch
Battery
Slide Battery to
Mate Connectors
Remove the Shipping Block
Latch