Instructions / Assembly

EOS
5
A
uxiliary Solar Panel
INTRODUCTION
Thank you for your recent purchase of the SOL-LUX EOS awning. We appreciate
having the opportunity to do business with you. Our customers are our top
priority, and we strive for 100% satisfaction. If you have any questions or
concerns about this order, please do not hesitate to contact us.
P
RODUCT
D
ESCRIPTION
The EOS Home Window Awning provides automated shade with simple to use
technology and stylized to blend with your home.
It comes ready for use with the following features:
Solar powered;
Automatic operation: Opens with daylight; closes when it becomes dark;
Bluetooth enabled to allow control with your smartphone or tablet using the
SOL-LUX Mobile App;
Available in a wide variety of colors and fabrics to match your home;
Simple installation;
Low maintenance.
T
ECHNICAL
I
NFORMATION
WIDTHS
A
VAILABLE:
39" to 120"
[99cm – 305cm] in 1/2" [1cm] increments
FABRIC EXTENSION:
30" [76cm] (measured from cassette to lead rail)
CANOPY PITCH
45° Fixed (angle the canopy slopes down)
CASSETTE
Aluminum components with a durable powder coat finish
FABRIC
Sunbrella
®
Woven Acrylic Fabric
POWER
Rechargeable 9.6V Lithium Iron Phosphate Batteries
(LiFePO
4
) with PCM
CHARGING
Integrated Solar Panel
CHARGING TIME
Battery comes partially charged and ready for use. It will reach
full charge within 2 to 5 days depending on amount of use and
the amount of sunlight the solar panel receives.
A
WNING WEIGHT
Base weight = 17.25 lbs. (based on a 48" awning with bracket)
Add 3.25 lbs. for each additional 12" of length
A
WNING
P
OSITION AND THE
S
UN
The solar panel located on the top right of the awning is used to
charge the E
OS battery and provides light level sensing for the
autonomous functions (auto extend and retract).
If the awning is mounted in a shaded area, such as directly under
an eve, the solar panel functions will be diminished and may not
provide adequate battery charging. For these cases, an auxiliary
solar panel should be purchased and installed in an area receiving
direct sunlight to increase sun level sensitivity and provide proper
battery charging.
The auxiliary solar panel can be installed during the original installation or can be added
after installation if needed. Installation instructions are included with the panel.
4"
4.27"
Awning Width
Fabric Width
Solar Panel
2.54"
2.5"
Lead Rail
Mounting Plate Latch
Mounting Plate Latch
Antenna
Mounting Plate