Instructions / Assembly

EOS

MANUALLY CLOSING THE AWNING

The EOS awning can be closed manually.

Using both hands, gently press

the lead rail into the cassette.

Apply pressure evenly to both

sides of the lead rail.

The fabric will roll up into the

cassette.

NOTE: After closing the awning, the

lead rail may “relax” and move out

from the cassette a little. This is

normal. The awning is secure and

can be removed for service.

REMOVING THE AWNING

The awning may be easily removed from the mounting plate for storage, service

or battery replacement.

1. Retract the awning either by shaking the lead rail to simulate wind, closing

manually as described above, or by using the Sol-Lux Mobile App..

2. Press the latches in and rotate the awning up.

3. Lift the awning up and off the mounting plate.

NOTE: It is not necessary to remove the mounting plate from the window.

Press Latches In

and Rotate Awning Up

SoL008

Latch

Lift Awning Off

of Mounting Plate

Latch

Evenly Press Lead

Rail into Cassette

Lead Rail

Cassette

SoL013