Data Sheet

available with shaft
available with worm gear
available with sprockets
These precision micro-motors are suitable for being
used as driving motors in 1:87 cars, servos and
demonstration models. These motors have a fixed
shaft without plastic parts!
As an option, the motors are also available with
worm gears or sprockets. You can find appropriate
gearboxes under gearbox manufacturing kits.
TECHNICAL DATA M600 / 605 / 610
Rated voltage (V) 1.3
Max. power output (W) at Urated 0,04
Idle speed (rpm) 16000
Starting torque (µNm) 60
Mean idle current (mA) 22
Weight (g) 1
Mass diameter/ length (mm) 6 x 10
Shaft diameter (mm) 0,8
Max. recommended values (at least 10 hrs)
Max. steady current (mA) 250
Max. continuous torque (µNm) 150
Max. voltage (V) 3
Motor-specific parameters
Back emf (V/1000 rpm) 0.0662
Torque constant (mNm/A) 0,637
Terminal resistance (Ohm) 11.7
Idle current at n=0 (mA) 17
Change in idle current (mA/rpm) 2.83E-04
ORDER NUMBERS
Order no. (motor with shaft) M600
Order no. (motor with M02 worm gear) M605
Order no. (motor with M02 sprocket) M610
EQUATIONS
Idle current II = Io + n*dlo/n
Current I = II + In with In = active current
Torque M = In*Kt
Voltage U = n/1000*emf + I*R
Power output Nn = M*pi()*n/30
www.1zu87modellbau.de
DATA SHEET
MICRO-MOTOR M600 / M605 / M610
Driving motor, dimensions: 6 x 10 mm
SOL
-EXPERT
group
group
Order No. M600
Order No. M605
Order No. M610
- Subject to changes and modification without prior notice / Copyright© august 2011 / Christian Repky
CEO: Christian Repky
SOL-EXPERT group
Dept. 1zu87modellbau.de
Phone: [phone]
Fax: [phone]
www.1zu87modellbau.de
Mehlisstrasse 19
D- 88255 Baindt
[e-mail]
M600, Conrad No. 245065