Data Sheet

TECHNICAL DATA
Rated voltage (V) 2
Max. power output (W) at Urated 0.4
Idle speed (rpm) 16000
Starting torque (µNm) 350
Mean idle current (mA) 20
Weight (g) 2.5
Mass diameter/ length (mm) 7 x 16
Shaft diameter (mm) 0.8
Max. recommended values (at least 10 hrs)
Max. steady current (mA) 300
Max. continuous torque (µNm) 320
Max. voltage (V) 5
Motor-specific parameters
Back emf (V/1000 rpm) 0.116
Torque constant (mNm/A) 1.108
Terminal resistance (Ohm) 6
Idle current at n=0 (mA) 10
Change in idle current (mA/rpm) 6.17E-04
ORDER NUMBERS
Order no. (motor with shaft) M700
Order no. (motor with M02 worm gear) M705
Order no. (motor with M02 sprocket) M710
M700 / M705 / M710
EQUATIONS
Idle current II = Io + n*dlo/n
Current I = II + In with In = active current
Torque M = In*Kt
Voltage U = n/1000*emf + I*R
Power output Nn = M*pi()*n/30
This extremely powerful motor is a DC motor. It is well-suited
for driving all models that require power, e.g. winches, HGVs,
etc. A speed regulator or a servo mechanism is required for
operating remote control systems. As an option, the motors
are also available with worm gears, shafts or sprockets.
You can find appropriate gearboxes under gearbox
manufacturing kits.
DATA SHEET
MICRO-MOTOR M700 / M705 / M710
M700, Conrad No. 245064
Driving motor, dimensions: 7 x 16 mm
www.1zu87modellbau.de
SOL
-EXPERT
group
group
Order No. M700
Order No. M705
Order No. M710
- Subject to changes and modification without prior notice / Copyright© april 2008 / Christian Repky
CEO: Christian Repky
SOL-EXPERT group
Dept. 1zu87modellbau.de
Phone: [phone]
Fax: [phone]
www.1zu87modellbau.de
Mehlisstrasse 19
D- 88255 Baindt
[e-mail]
available with shaft
available with worm gear
available with sprockets