Instructions

Technical data RE 105
Operating current in V
Motor current continuous in mA
Motor current impulse in A
Weight excluding cable in g
Dimensions in mm (l x b x h)
Automatic zero-point recognition
2,7 - 5,5
1800 *
8*
0,32
12,8 x 9 x 2,5
yes
USER MANUAL
CONTROLLER FORWARD / REVERSE
ER105 SPEED CONTROLLER
Order No.: ER105
Dimensions: 12,8 x 9 x 2,5 mm
www.1zu87modellbau.de
SOL
-EXPERT
group
group
Imp.
+
-
Terminal outputs
This speed controller stands out on account of its state-of-the-art functionality in the smallest possible space.
With a continuous current of 1900 mA and an impulse current of 8 A, the ER105 is not only suitable for 1:87 scale
modelling, but also for considerably larger scales, such as 1:32. The stored linear characteristic line guarantees a
convenient control of DC motors.
Switching on the transmitter and receiver unit.
First the transmitter is switched on, then the receiver. The control knobs must not be moved until approx. 3 seconds.
Now the precise zero point is registered.
50
25
75
100
0
Power
in %
Lever travel
in %
5025 75 100
(Linear)
Wiring diagram
Characteristic line
Safety instructions to ensure long service from the ER105
Before first using the ER105, the following checks should be made to prevent any damage
being caused to the controller:
- check on the polarity of the operating current
- check that there is no short-circuit at the motor outputs.
In case of faults or malfunction of the ER105, please read our suggested hints for suggested solutions under
www.1zu87modellbau.de here you will also finds tips for correcting faults.
ER105 Functions and instructions
Motor out
Imp.
+
-
Receiver in
+
-
(*) The output stage should be cooled in an appropriate manner
that corresponds to the loading of the controller!
- Subject to modification / E&OE / As at June 2009 / Christian Repky © -
CEO: Christian Repky
SOL-EXPERT group
Dept. 1zu87modellbau.de
Phone: [phone]
Fax: [phone]
www.1zu87modellbau.de
Mehlisstrasse 19
D- 88255 Baindt
[e-mail]
Conrad No. 248760