Data Sheet

DATA SHEET
Motor for micro-models, enclosed. Brass with steel axle, developed specifically for 1:87 lorries.
Gear Assembly Set G494, 1:494 Item no. 96753
www.1zu87modellbau.de
SOL-EXPERT
group
group
Originally developed as a motor for 1:87 lorries, this small gear unit
is also excellently suited for light motors on larger vehicles.
It can even be used to implement winches and special functions.
The G494 is an enclosed gear assembly set with a gear reduction
of 1:494. Ideal for street and off-road lorries.
The gear assembly set is screwed together, so it can always be
disassembled and is service-friendly. The G494 further has M1
mounting holes and can therefore be screwed to the vehicle frame.
Because of its compact size the G494 can be built into the vehicle
frame to even build tractor units.
Mechanical data:
Dimension:
Length 22 mm
Width (axle beam) 12 mm
Width (between frame sides) 8.5 mm
Height 9 mm
Height (axle to bottom edge) 4 mm
Weight 4.5
Ratio 1:494
Voltage: 3.7 V
Electrical data:
Gear assembly set G494
Subject to changes and errors / Status January 2017 / Christian Repky ©
SOL-EXPERT group
Dept. 1zu87modellbau.de
Managing Director: Christian Repky
Mehlisstrasse 19
88255 Baindt
Tel.: 07502 - 941150
Fax: 07502 - 94115-99
www.sol-expert-group.de
[e-mail]
22
Gear Assembly Set G494,
installed in a 1zu87 wheel loader