Instructions

Parts list
Firmenanschrift aufbewahren -
Keep the address of the company -
Veuillez conserver l'adresse -
Adres bewaren -
Nicht geeignet für Kinder unter 3 Jahren! - Verschluckbare
Kleinteile! Not suitable for children under 3 years! -
Contains small parts! Ne convient pas pour les enfants de moins
de trois ans! - Contient de petites pièces pouvant être absorbées! Niet
geschikt voor kinderen beneden 3 jaar! - Kleine onderdelen Kunnen worden ingeslikt!
Tel.: [phone] - 94115-0 - Fax: [phone]
[e-mail] - www.sol-expert-group.de
SOL-EXPERT group, C.Repky - Mehlisstrasse 19 - D-88255 Baindt
SOL-EXPERT
group
group
10+
No. 78889
Number Component Value / Description
1 Circuit board (PCB) 63 mm fitted with Qx5252
3 LEDs white
1 LED green
3 Slide switches Toggle switch, 2 pole
1 Resistor 100 ohm
1 Inductor 56 µH
1 Inductor 220 µH
1 Simple battery holder Size “AA”, UM-3X1
1 NiMH battery 600 mAh, 1.2 V
1 Circular solar panel 50 mA @ 2V
3 Separators made from plastic
1 Cable red
1 Cable black
What else is required:
Jam-jar or preservative jar, lid diameter at least 85 mm
Metal drill bit 5 mm
Hand counterbore
Glue gun with adhesive cartridges
Soldering iron
Solder
Jam-jar lamp,
solar-powered, assembly kit
4 0 3 7 3 7 3 7 8 88 9 7
Assembly kit for solar-powered jam-jar lamp
Features of the solar-powered jam-jar lamp assembly kit
Safety Instructions
General: This soldering assembly kit should provide an easy introduction to the basics of soldering. It is perfectly suited for
teaching how to solder in schools and workshops. As well as this, the jam-jar assembly kit can be used at summer camps, on
summer courses and for other activities to help teach kids how to solder.
If the circuit board is already soldered and installed in the jam-jar, it can be used outside as a solar lamp or a solar powered
garden decoration.
The energy of the sun is captured by the solar panel and stored in the battery. As soon as it gets dark and as long as the battery
has been able to store energy over the course of the day, the 3 LEDs should be able to illuminate automatically. The jar shines
from within and illuminates its surroundings. With the addition of some decorative materials such as a coloured or patterned
serviette, every jam-jar can be decorated uniquely. Whether you paint the glass, attach paper cuttings in a collage or stick on
glitter, sequins or seashells - your creativity should know no bounds!
The jam-jar lamp can be switched between summer and winter settings in order to guarantee the longest possible illumination
period. In summer, the lamp functions for 5 hours at a time.
Keep this set of instructions in a safe place so that it can be consulted again in the future if needed! It contains important information!
If the battery is defective, only replace it with a new battery of the same value. (600mAh/1.2V)
This assembly set is solely intended to be powered using batteries.
During soldering, the soldering iron, solder and the component parts which are being soldered are extremely hot. Please be
especially careful with them!
Always use a soldering pad when soldering! This prevents the component parts and circuit board from sliding around.
In order to keep the soldering iron secure during assembly, we recommend using a soldering iron stand.
NEVER connect the assembly kit to a mains voltage
of 230 V! This could seriously pose a danger to your life and cause death or severe injuries!
We recommend:
Supervision of the assembly
and the soldering process by
an adult! (Supervise all soldering
sites at all times!)
MADE IN EUROPE
Conrad No. 1406672
Please bring the device after the expiry of the period of use
to certified suppliers!