Instructions

Firmenanschrift aufbewahren -
Keep the address of the company -
Veuillez conserver l'adresse -
Adres bewaren -
Nicht geeignet für Kinder unter 3 Jahren! - Verschluckbare
Kleinteile! Not suitable for children under 3 years! -
Contains small parts! Ne convient pas pour les enfants de moins
de trois ans! - Contient de petites pièces pouvant être absorbées! Niet
geschikt voor kinderen beneden 3 jaar! - Kleine onderdelen Kunnen worden ingeslikt!
Tel.: [phone] - 94115-0 - Fax: [phone]
[e-mail] - www.sol-expert-group.de
SOL-EXPERT group, C.Repky - Mehlisstrasse 19 - D-88255 Baindt
SOL-EXPERT
group
group
No. 76334
Qty. Circuit board Value/Description
1 Platine 96697
5 LED 5 mm (LED7 - LED11) Colour green
6 LED 5 mm (LED1 - LED6) Colour red
6 LED 5 mm (LED12 - LED17) Colour yellow
3 Resistor (R1 - R3) 1K5 Ohm
3 Resistor (R4 - R6) 4K7 Ohm
6 Resistor (R7 - R12) 330 Ohm
1 Capacitor (C4) 100 nF/10V
2 Capacitors (C2/C3) 22 pF/10V
3 Transistor (T1 - T3) BC557B
2 Button (J3 - J4) 3301
1 Quartz (Q1) 16MHz
1 USB connector vormontiert
1 Processor ATTINY2313
1 Front panel engraved
4 0 3 7 3 7 3 7 6 33 4 4
MADE IN EUROPE
10+
Return the device
to a certified provider at the
end of its useful life!
Recommendation for children
and teenagers: Assembly and
soldering should be supervised
by an adult.
IMPORTANT SAFETY NOTES
Keep this manual for future reference! It contains important information.
This kit is intended for USB power only.
The soldering iron, solder and the parts being soldered become very hot. Be very careful!
Always use a mat when soldering! This prevents parts and the circuit board from slipping.
We recommend using a soldering iron holder to set the soldering iron down safely during use.
Never connect the kit to 230 V mains voltage!
Acute danger to life!
The binary clock soldering kit
How to convert the binary value to a decimal number: simply add all of the values with lit LED. A practice example:
The "binary clock" circuit board building kit is excellent to learn
soldering skills and any novice electricians and hobby technicians.
Over 40 parts are soldered onto the circuit board to build the clock,
including a preprogrammed microprocessor. This enables showing the "binary" time through LEDs. One LED row is assigned to the
hour/minute and one to the seconds. The actual time is set with buttons. The "binary clock" electronics building kit is powered via
power bank or via USB port. This eliminates costly batteries. The included plywood front panel shows the binary values.
These can then be converted to decimal values. Dimensions: 100 x 80 mm.
Parts list Check and sort out parts!
BC557B
104104
22
You will also need:
Soldering iron, solder, wire cutters, tweezers, power bank
Hour
8+1= 9 hours
124816
Minute
124
32+16+2 = 50 minutes
8
16
32
Seconds
124
16+4+1 = 21 seconds
8
16
32
9:50
21
seconds
Binary clock, soldering kit -
powered via power bank or USB port
QR Codes
Cliquez ici pour les instructions:
Klik hier voor de instructies:
https://www.sol-
expert-
group.de/All-about-soldering/Smart-
kits-for-soldering/Soldering-kit-Binary-
clock::1264.html?language=en
https://www.sol-
expert-
group.de/Rond-solderen/Clever-kits-voor-
het-solderen/Soldeerkit-Binaire-
klok::1264.html?language=nl
Click here for the instructions:
Hier geht es zur Anleitung:
https://www.sol
-expert-
group.de/Rund-ums-Loeten/Pfiffige-
Loetbausaetze/Loetbausatz-Binaere-
Uhr::1264.html?language=de
https://www.sol-
expert-
group.de/Autour-de-la-soudure/Kits-astucieux-
pour-la-soudure/Kit-de-soudage-Horloge-
binaire::1264.html?language=fr
Conrad No.
1818579