Instructions
MADE IN EUROPE
SOL-EXPERT
group
group
Firmenanschrift aufbewahren -
Keep the address
of the company -
Veuillez conserver l'adresse -
Adres bewaren -
Nicht
geeignet für Kinder unter 3 Jahren! -
Verschluckbare Kleinteile!
Not suitable for children
under 3 years! - Contains small parts!
Ne convient
pas pour les enfants de moins de trois
ans! - Contient de petites pièces pouvant
être absorbées! Niet
geschikt voor kinderen beneden 3 jaar! -
Kleine onderdelen Kunnen worden ingeslikt!
Tel.: +49 (0)7502 - 94115-0 - Fax:
info@sol-expert-group.de - www.sol-expert-group.de
SOL-EXPERT group, C.Repky - Mehlisstrasse 19 - D-88255 Baindt
+49 (0)7502 - 94115-99
10+
© 2016 C. Repky
Art.Nr.: 36500
4 0 3 7 37 3 3 6 5 0 0 5
What else is required:
Soldering iron, solder, side
cutters, tweezers
Torch, Soldering kit
Jam-jar lamp,
solar-powered, Soldering kit
Art.no. 78889
Insert LED casing
H
J
Solder the remaining red to the resistor and then
carry out a After that, insert the
batteries and test whether it switches on and off.
visual check.
K
Build the frame
Caution: POSITION
L
1
2
3
Mount the frame on the (1) plate and then
insert (2) the (3) bracket
M
0,5 cm
0,5 cm
Shorten the length of the resistor by approx.
0.5 cm. Then solder the resistor to the right leg
of the LED and the black battery clip cable to
the left.
1.
2.
3.
4.
2.
1.
3.
Shorten the LED leg
to approx. 1.5 cm
Insert the LED in
the LED casing.
Carefully bend the
LED leg with tweezers
Assemble LED
Warning:
The longer
leg of the LED
must be on
the right (R) side!
RL
I
1
2
3
1,5 cm
R
L
1 cm
1 cm
Insert battery and tuck away the cable
N
Remove protective film from the acrylic panel,
place acrylic panel on the casing and fix with
2 elastic bands
O
(0,5 cm) (0,5 cm)
Visual check:
First, sit back and relax and
let your thoughts wander.
And when you are completely
relaxed, look at the assembly instructions again from
the front and check whether your have done everything
as described in the instructions.
In particular, check that the cable is soldered to the
right part. Take your time to look at everything and
when you have checked it all, put the battery in.
You should be able to now turn on the LED whenever
you press the button. With the switch you can turn the
LED on or off. If the torch is turned off with the switch,
it can be turned on with button.
We recommend:
Supervision of the assembly and
the soldering process by an adult!
Soldering kit, content
Wi
th
a g
r
ea
t
lam
p
e
ffe
c
t
!
Do you already know about the cool, solar-
powered jam-jar lamp?
International Morse Code:
A
1
U
B
2
V
C
3
W
D
4
X
E
5
Y
Z
F
6
G
7
H
8
I
9
J
K
L
M
N
O
P
Q
R
S
T
0
What is Professor Schlau
saying to you in the speech
bubble..?
Preparation:
Carefully remove the wooden
parts from the wooden plate
Thoroughly check the list of
components to check that all
pieces are there:
Wi
th
a g
r
ea
t
lam
p
e
ffe
c
t
!
Return the device
to a certified
provider at the end
of its useful life!
Conrad No. 1530398