Installation & Assembly

Step 1
This Corner has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Corner parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the parts
and steps before assembly.
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Amrest(A) with its inside facing up .
Attach Coner Back(B) to Amrest (A) using Bolt(②) and Washer(③) with Allen Key(①) as
shown above.
Do not fully tigthen.
ATTENTION: There may be some PE wicker that may have covered the Mounting
Points. To ease assembly, guide and slide the PE wicker away from these Mounting
Points.
DO NOT CUT AWAY ANY PE WICKER as this would cause the wicker to unravel!
FRONT FACING
Armrest (A)
Back Cushion (H)
Corner Seat (C)
Side Plate (D)
Back Cushion (G)
Corner Back (B)
Seat Cushion (F)
Foot(E)
3 OF 6