Outdoor Wicker Coffee Table
PART LIST A C B Wicker Top 1 PC Side Panel 2 PCS End Panel 2 PCS HARDWARE LIST #1 #2 #3 #4 #5 M6*30mm M6*35mm D18mm D12mm M6mm Short Bolt 12 PCS Long Bolt 8 PCS Washer 12 PCS Small Washer 8 PCS Nut 8 PCS #6 #7 #8 M6mm M6mm Wrench 1 PC Allen Key 1 PC L Foot 4 PCS EXTRA HARDWARE LIST #1 #3 #2 M6*30mm M6*35mm Short Bolt 1 PC Long Bolt 1 PC #5 #4 D18mm Washer 1 PC 2 D12mm M6mm Small Washer 1 PC Nut 1 PC
Step 1. Lay wicker top (part A) on a soft flat surface, such as carpet, as shown below .Attach side panels (part B) to top panel (part A) using short bolts (part #1),washers (part #3) and allen key (part #7). NOTE:Please do not fully tighten bolts until unit is fully assembled. #7 #1 #3 B A B #1 #3 #7 x4 x4 x1 Step 2. Attach end panels (part #C) to assembled unit (parts A&B) using short bolts (part #1), washers (part #3) and allen key (part #7).
Step 3. Attach L feet (part #8) to assembled unit (parts B&C) using long bolts (part #2),small washers (part #4),nuts (part #5),wrench (part #6) and allen key (part #7). NOTE: Please fully tighten all bolts at this time. #7 #8 #2 #4 #5 #6 B C A B C Step 4.Сarefully turn the coffee table upright.
