Outdoor Wicker Armless Chair
PART LIST A Back Panel 1 PC E C B Seat Panel 1 PC Side Panel 1 PC F Cover of Seat Cushion * 1 PC Core of Seat Cushion 1 PC H G *Please note cushion covers will ship separately.
Step 1. Lay back panel (part A) down on a soft flat surface, such as carpet, as shown below . Attach seat panel (part B) to back panel (part A) using long bolts(part #3),washers (part #5),nuts (part #4),wrench(part #7) and allen key (part #8). NOTE:Please do not fully tighten bolts until unit is fully assembled. #8 #3 #5 B #5 #4 A #7 #3 #4 #5 #7 #8 x4 x4 x8 x1 x1 Step 2.
Step 3. Attach L feet (part #9) to assembled unit (parts B&C) using medium bolts (part #2), small washers (part #6),nuts (part #4),wrench (part #7) and allen key (part #8). #8 #2 #9 B #6 #4 #7 C A #2 #4 #6 #7 #8 #9 Step 4.Insert core of seat cushion ( part F ) into cover of seat cushion ( part E). lnsert core of back cushion (part H) into cover of back cushion (part G).
Step 5.Carefully turn the assembled chair upright and add cushions as shown below. Step 6.Use plastic clips (part #10) to secure additional units together as shown.
