Outdoor Wicker Arm Chair
PART LIST A C B Arm Panel 2 PCS Back Panel 1 PC D Seat Panel 1 PC E Cover of Seat Cushion * 1 PC Core of Seat Cushion 1 PC G F *Please note cushion covers will ship separately.
Step 1. Lay back panel (part B) down on a soft flat surface, such as carpet, as shown below. Attach arm panel (part A) to back panel (part B) using bolts(part #1),washers (part #3), nuts (part #2),wrench(part #4) and allen key (part #5). . NOTE:Please do not fully tighten bolts until unit is fully assembled. A #3 #1 #5 #4 #2 #3 #1 #2 #3 #4 #5 B x3 x3 x6 x1 x1 Step 2.
Step 3. Attach arm panel (part A) to assembled unit (parts C&B) using bolts (part #1),washers (part #3),nuts (part #2),wrench (part #4) and allen key (part #5). NOTE: Please fully tighten all bolts at this time. #5 #1 #3 #3 #2 #4 A A C #1 #2 #3 #4 #5 B Step 4.Insert core of seat cushion ( part E ) into cover of seat cushion ( part D). lnsert core of back cushion (part G) into cover of back cushion (part F).
Step 6.Carefully turn the assembled chair upright and add cushions as shown below.
