Assembly Instructions

Step 6
Place the Back Cushion(F) and Seat Cushion(G) onto the Chair.
Your Club Chair is ready for use.
Caution:This Club Chair can only be used on a flat, level surface.
Step 4
Turn the Club Chair right side up.
Place the Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit into to the Club Chair.
This would help to align all the parts at all the joint areas.
Then get off the Club Chair, and in a sequential manner, proceed to tighten all bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles, loosen the bolts and execute this same process.
If the Club Chair is not stable it could lead to damage to the product.
Note: This step is done better with the assistance of a second adult.
Attach the Feet(D) to the Chair using Bolts(⑤) and Washer Rings(⑥) with Allen Key(④).
Step 5
5 OF 6