Caution: You must read this before you proceed CLUB CHAIR Label Picture Description QTY A Left Armrest 1 B Chair Back 1 C Chair Seat 1 D Right Armrest 1 E Foot 4 F Seat Cushion 1 G Back Cushion 1 1 OF 6
Label Picture Description QTY ① Allen Key (M6) 1 ② Bolt (M6*45mm) 13 ③ Washer 13 ④ Allen Key (M4) 1 ⑤ Bolt (M6*45mm) 9 ⑥ Washer Ring 9 Before Beginning Assembly: 2 OF 6
Back Cushion (G) Chair Back (B) Right Armrest (D) Left Armrest (A) Seat Cushion (F) Chair Seat (C) Foot(E) FRONT FACING This Club Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Club Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Attach Seat(C) between the Left Armrest(A) and Chair Back(B) using Bolt(②) and Washer(③) with Allen Key(①) from position # I to # V as shown above. Do not fully tigthen. Step 3 Attach Right Armrest(D) to the Chair Back(B) and Chair Seat(C) using Bolt(②) and Washer(③) with Allen Key(①) from position # VI to # X as shown above. Do not fully tigthen.
Step 4 Attach the Feet(D) to the Chair using Bolts(⑤) and Washer Rings(⑥) with Allen Key(④). Step 5 Turn the Club Chair right side up. Place the Chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Club Chair. This would help to align all the parts at all the joint areas. Then get off the Club Chair, and in a sequential manner, proceed to tighten all bolts. When tightening the Bolts, tighten sequentially.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
