Caution: You must read this before you proceed LEFT ARMCHAIR Label Picture Description QTY H Left Armrest 1 I Back 1 J Seat 1 D Side Plate 1 E Foot 4 F Seat Cushion 1 G Back Cushion 1 1 OF 6
Label Picture Description QTY ① Allen Key (M6) 1 ② Bolt (M6*45mm) 13 ③ Washer 13 ④ Allen Key (M4) 1 ⑤ Bolt (M6*45mm) 9 ⑥ Washer Ring 9 Before Beginning Assembly: 2 OF 6
Overview Back Cushion (G) Back (I) Left Armrest (H) Seat Cushion Foot (E) Seat (J) Side plate (D) FRONT FACING This Left Armchair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Left Armchair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Attach Seat(J) between the Left Armrest(H) and Back(I) using Bolt(②) and Washer(③) with Allen Key(①) from position # I to # V as shown above. Do not fully tigthen. Step 3 Attach Side Plate(D) between the Back(I) and Seat(J) using Bolt(②) and Washer(③) with Allen Key(①) as shown above. Do not fully tigthen. Step 4 Attach the Foot(E) to the Chair using Bolts(⑤) and Washer Rings(⑥) with Allen Key(④).
Step 5 Turn the Left Armchair right side up. Place the Left Armchair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Left Armchair. This would help to align all the parts at all the joint areas. Then get off the Left Armchair, and in a sequential manner, proceed to tighten all bolts. When tightening the Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
Caution: You must read this before you proceed RIGHT ARMREST Label Picture Description QTY A Right Armrest 1 B Back 1 C Seat 1 D Side Plate 1 E Foot 4 F Seat Cushion 1 G Back Cushion 1 1 OF 6
Label Picture Description QTY ① Allen Key (M6) 1 ② Bolt (M6*45mm) 13 ③ Washer 13 ④ Allen Key (M4) 1 ⑤ Bolt (M6*45mm) 9 ⑥ Washer Ring 9 Before Beginning Assembly: 2 OF 6
Back Cushion (G) Right Armrest (A) Back (B) Seat Cushion (F) Side Plate (D) Seat (C) Foot (E) FRONT FACING This Right Armchair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Right Armchair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Attach Seat(C) between the Right Armrest(A) and Back(B) using Bolt(②) and Washer(③) with Allen Key(①) from position # I to # V as shown above. Do not fully tigthen. Step 3 Attach Side Plate(D) between the Back(B) and Seat(C) using Bolt(②) and Washer(③) with Allen Key(①) as shown above. Do not fully tigthen. Step 4 Attach the Foot(E) to the Chair using Bolts(⑤) and Washer Rings(⑥) with Allen Key(④).
Step 5 Turn the Right Armrest right side up. Place the Right Armrest on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Right Armrest. This would help to align all the parts at all the joint areas. Then get off the Right Armrest, and in a sequential manner, proceed to tighten all bolts. When tightening the Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
