Installation & Assembly

Step 8. Lay wicker top (part G) upside down on a soft ﬂat surface, such as carpet, as shown below. Attach

long side panels (part H) to wicker top (part G) using bolts (part M), ﬂat washers (part O)

NOTE: Please do not fully tighten bolts until unit is fully assembled.

Step 9. Attach short side panels (part I) to wicker top (part G) and long side panels (part H) using

bolts (part M), ﬂat washers (part O) and allen wrench (part Q).

NOTE: Please fully tighten all bolts at this time.

and allen wrench (part Q).

x10