Installation & Assembly

Spa Owner’s Manual
- 6 -
◼ SPA control panel instruction: Refer to “Control Panel Operation Guide” together with the product.
◼ Jets instruction: Jets are the main parts in which massage comes into effect. Almost all of the jets in your spa are adjustable except the 1” jets. You
can adjust the water flow through by rotating the jet face.
➢ Turn the jet face clockwise about 1/4 of a turn, the jets are turned on.
➢ Turn the jet face anti-clockwise about 1/4 of a turn, the jets are turned off.
NOTE: Some jets and the air jets are unadjustable. Don’t rotate these jets with force. It may cause damages to the jets.
◼ Air valve instruction: There are different styles of air valve as per the requirement of dealers. Your spa may have one of the air valves in below figure.
Air controls affect the pressure of your jets by adding air. You may have more than one air valve on your spa, each of which will be associated to a
certain group of jets. By opening an air valve when the pump is on, air will be drawn into the water flow to increase the massage strength.
➢ When the air valve is turned clockwise, it will decrease the power of the massage jets.
➢ When it is turned anti-clockwise, it will increase the power of the massage jets.
NOTE: For better heating efficiency, please turn the air valves off. The air may cool the spa water temperature.
Increase
Decreas
e
Turned off
Turned on