Installation & Assembly

Spa Owner’s Manual
- 14 -
◼ Pump maintenance (air locks): If you have emptied and refilled your spa and the pump comes on but there is no water movement in your spa, the
spa is probably suffering from an air lock. This situation is more often for circulation pump than other massage pumps. To get the air out of your pump,
turn the spa off and find the circulation pump, which is situated inside the spa cabinet. Locate the pipe which goes into the top of the pump. This has a
large nut, which is called the barrel union. Undo anti-clockwise until you hear the air escape. When the water comes out, re-tighten. This should fix the
airlock. Sometimes you have to start the pump again to remove the air.
NOTE: to prevent this from happening, always fill the spa through the filter box.
◼ LED lights maintenance: Your spa will be equipped with one kind of LED lights as below. If the LED lights can not be on or its color is different from
other lights, you need to replace it. Please follow below steps to replace the LED lights.
➢ How to replace the plug-in style LED lights: pull out the defective LED light from its holder on the tub shell and the white socket. And then insert
the new light to the holder and socket accordingly.