Use and Care Manual

Step 12A
48
48GW
1
2
3
11157
11157
Install 2 overlapping panels to each of the trusses. Leave gaps in between
until all of the trusses are covered. Do this for each side of the shed.
Truss
11157
(x3)
*When overlapping panels, make sure
arrow is towards the top and covered up
1
2
3
*For 12x15’+ sheds,
remove the bracing
from step 3C on page
25. Set that piece
aside for later use.
66646
W
(x48)
*Panel does not rest on ground.
Washers are to be used on painted parts only.
Washers are not necessary on unpainted parts and
there are not enough to use on every screw and bolt.
Painted screws are to be used on painted parts
only. Make sure painted screws match wall color.
*Lubricate screws
to aid assembly
66611
WS
(x48)
Extension x1
11157
(x4)
66646
W
(x66)
66611
WS
(x66)
*Leave holes
on ends open
for overlap
Install one panel around
the door opening.