Use and Care Manual

17
Step 32C: Extension Spring Assembly
108GW
108
Attach spring cable loop to bottom
fi xture stud and thread spring cable
over pulley.
8
Thread spring cable
around spring pulley.
9
Spring
Cable Loop
Bottom
Fixture Stud
Pulley
Spring Cable
2
S Hook
2
Cable Clip
2
Spring
Cable
Spring
Pulley
Safety Cable
Tie a cable clip to the spring cable
and connect it to an S-hook.
Cable Clip
Spring
Cable
Stretch spring 2”-3” and clip the S-hook to a hole in the hori-
zontal angle. This is referred to as initial stretch and may need
adjustment (see end of extension spring assembly details).
11
Cable Clip
S-Hook
10